Sidite Solar, Solar Water Heater, Solar Collector, Solar Panels: 五月 2017

2017年5月30日星期二

Swimming Pool Solar Water Heater

Solar vacuum tube was evacuated into the tank,the coating inside of tube can absorb more than 92%

heat energy from sunshine,The cold water in water tank flows into the tube and become hot,because

of different density between cold and hot,there will be a natural circulation in the tube.Hot water will

float back to tank.

no pressure room heater solar water heater

High absorption room heater no pressure solar water heater
Specifications:

Collector specification:

47-1500,58-1800,70-2000

Inner tank material:

Imported foodSpecifications:

Collector specification:

47-1500,58-1800,70-2000

Inner tank material:

Imported food grade stainless steel SUS304-2B

Outer tank material:

High quality color plate or galvanized plate,high quality

silver shine Fluorocarbon plate

Insulation layer:

50mm-60mm polyurethane foam with constant

temperature

Bracket material:imported high quality electrophoresis

aluminum alloy grade stainless steel SUS304-2B

Outer tank material:

High quality color plate or galvanized plate,high quality

silver shine Fluorocarbon plate

Insulation layer:

50mm-60mm polyurethane foam with constant temperature

SIDITE Solar:
China Manufacturer;
Solar Water Heater, Solar Collector;

Zhejiang Sidite New Energy Co.,Ltd.

China manufacturer, Solar water heater, solar hot water, solar hot water heater, solar water heater system, heat pipe solar water heater, pressured solar water heater, flat panel solar water heater, solar collector, solar thermal collector, vacuum tube solar collector, evacuated tube solar collector, solar panels, 60W, 250W, 300W, 500W, 5000 Watt, 24V solar panel, Low price High quality.

Web: www.sidite-solar.com
Tel: 0086-573-83224422 / 83225522
Fax: 0086-573-83225533

Solar Water Heater Parts

Specifications

- High quality Low cost
- CE,CCC,ISO9000 certificated
- Hot seller model yearly

Component of Production:
Material of Inner Tank: SUS304-2B Stainless Steel, thickness: 0.4mm, 0.5mm, 0.6mm
Material of Outer Tank: Stainless steel, thickness: 0.31mm/0.4mm
Copper Coil: diameter : 12mm, thickness: 1mm
Heat Preservation : polyurethane foam with 55mm thickness
Magnetic-controlled Al-N-Al splash all glass evacuated heat-collecting tubes
Specification: Φ58mm*1800mm
Material of Support: Stainless steel ,thickness: 1.2mm/1.5mm
Capacity: 100L-300L

Features:

Pre-heated pressurized solar water heater is our newest products, adopt the copper coil , it improves the problem of traditional solar water heater, like the hot water is limited, few out water , heat for long time, the water quality is worse and worse. The technology we first research “heat for twice” is successful, let the connection of the high temperature high effect and hot water fast circulation perfect, pushing the solar energy into a new stage.

SIDITE Solar:
China Manufacturer;
Solar Water Heater, Solar Collector;

Zhejiang Sidite New Energy Co.,Ltd.

Balcony Solar Water Heater

Features and advantages

1, High efficient and economical system.

2, The water inside of the vacuum tubes

3, The vacuum tube insert into the non-pressure tank , so the hot water and cold could circulate by

themselves beacuse of the different density.

4, Reliable and efficient with twin-glass solar tubes

5, Polyurethane insulation ensures a good heating performance and loss.

6, Easy to install and high heat transfer rate over 95%.

SIDITE Solar:
China Manufacturer;
Solar Water Heater, Solar Collector;

Zhejiang Sidite New Energy Co.,Ltd.

Solar Energy Water Heater

Product Description

1) It can withstand pressure of tap water when it works

2) There is no need to wait

3) Completely automatic operation

4) Drinking water quality to promote life quality

5) Temperature preservation can last for 80 hours

6) Without volatile tubes

7) Without incrusting, long usage life

Specifications:

1) Body material: interior SUS 304-2B

2) Water tank: porcelain steel

3) Coil material: red copper

4) Water capacity: 180L, 210L, 240L, 300L, 360L

5) Pressure: 6 bar

6) Heat preservation: 80-90h

7) Hail resistance: 25mm

8) Tube standards: 18, 21, 24, 30, or 36 tubes with 58mm diameter and 1.9m /2.1m length

Technical Datapre-heated pressure system

SIDITE Solar:
China Manufacturer;
Solar Water Heater, Solar Collector;

Zhejiang Sidite New Energy Co.,Ltd.

Rooftop Solar Water Heater

Material of inner tank

Food grade SUS 304-2B stainless steel, 0.4mm thickness

Inner tank diameter

Ø360mm

Material of outer tank

Draw bench silver steel (PVDF) with thickness of 0.4mm (Best anti-erode
material. Especially for the seaside area)

Outer tank diameter

Ø460mm

Tank insulating layer

50mm high-density polyurethane foam

Foam pressure

32kg/m3 minimum

Heat reservation

72 hours

Material of cap

High quality color steel 1.5mm thickness

Inlet and outlet pipe

Male G 3/4" screw, SUS 304-2B stainless steel, 2mm thickness (air vent 1/2'')

Welding

Argon arc welding

Structure of tank

4 holes: air vent/water inlet /water outlet/back-up hole

SIDITE Solar:
China Manufacturer;
Solar Water Heater, Solar Collector;

Zhejiang Sidite New Energy Co.,Ltd.

Solar Panel Water Heater

Non-pressurized solar water heaters working principle

This type solar water heater uses the all-glass evacuated solar collector tubes as the heat-absorb element. The high vacuum degree of the clearance between the outer and inner tube can reduce the heat emission which caused by convection and conduction to a very low level. All-glass evacuated tube transfers sun energy into heat energy by the high absorption rate and low emittance rate of layer films. Depend on the different density between the hot water and the cold water, a cycle can be created in the tube which hot water ascending and cold water descending status. Keeping natural circulation like this, the water in the tank will be heated.

SIDITE Solar:
China Manufacturer;
Solar Water Heater, Solar Collector;

Zhejiang Sidite New Energy Co.,Ltd.

Solar Room Heater

Specifications

Pre-heated solar water heater: 1) With copper coil, 2) stainless steel material 3) with heat pipes

Pre-heated solar water heater detailed Descriptions:
1, Inner tank: Stainless steel-0.6mm
2, Vacuum tube: QB-AL-N/AL-58-2000mm
3, Out tank: Painted steel-1.5mm; Stainless steel SUS430-1.4mm
4, Frame: coated galvanized steel-1.5mm; Stainless steel SUS301-1.5mm
5, The material of insulation: Polyurethane 50mm
6, The reflector: Aluminum component: AL 99.85% surface oxidation.
7, Copper coil: Φ12mm, thickness 0.8mm.

The Characteristics:

1, Use the cooper coil as the heat exchanger, according with international fashion trend, it is simple to install and use.

2, It takes the advantage of the tap waters pressure, more pressure, more comfortable.

3, It can produce hot water with constant temperature, it is safe and comfortable to use.

4, The water can be heated rapidly, so it can produce the high quality hot water.

5, It can produce more hot water that the general types because it isnt restricted by the volume of the tank.

SIDITE Solar:
China Manufacturer;
Solar Water Heater, Solar Collector;

Zhejiang Sidite New Energy Co.,Ltd.

Vacuum Tube Solar Water Heater

Auxiliary Equipments:

Intelligent Controller, display water temperature in storage tank and automatically control backup heating device;

Electrical Heater, reliable electric booster with thermal cut-out working in cloudy or raining days for sufficient hot water;

Magnesium anode, in areas with hard water, this device is installed in water storage tank to effectively prevent system from corrosion.

Pipe & fittings: Φ22mm insulated stainless steel corrugated pipe or copper pipe is suggested as circulation pipe for flat panel solar water heater, copper fitting is suggested for pipe connection.

Warranty:

10 years international responsibility for VSION pressure flat plate solar water heater and flat panel solar collectors.

Advantages of VISION Pressure Flat Panel Solar Water Heater:

comparing with pressure heat pipe solar water heater:

1. More simple collector installation;

2. More economical flat plate collector;

3. More strong and safe collector with tempered glass glazing;

4. Traditional solar collector with more market share;

5. Enjoys much more popularity in warm area;

Parts Description:

VISION VPF series flat plate thermosiphonsolar water heater is such a kind of thermosiphon solar water heating device with flat plate collector placed below high pressure hot water tank.

The tank and flat plate are connected with circulation pipes to form an open-loop solar water heating system, the house hold water is heated directly inside flat panel collector and rise to be stored inside hot water tank.

SIDITE Solar:
China Manufacturer;
Solar Water Heater, Solar Collector;

Zhejiang Sidite New Energy Co.,Ltd.

订阅：博文 (Atom)