Sidite Solar, Solar Water Heater, Solar Collector, Solar Panels: 八月 2018

2018年8月15日星期三

NON-PRESSURIZED GALVANIZED STEEL SOLAR WATER HEATER SD-G

1.With intelligent controller.
2.Easy to install for ﬂat roof and pitched roof, auxiliary heating by electrical heater.
3.High pressure polyurethane foaming with thickness 55mm.
4.Stable and reliable performance, well wind resistance.
5.SUS304-2B inner tank, sillicon seals.
6.SUS304-2B/BA outer tank, against rust and corrosion.
7.Eco and economical, improves the environment and save your fuel cost.

Working principle:
This model operates to feed water automatically. Using thermosiphon system- depending on the different density between solar hot water heater and cold water, a water flowing cycle is created in the tubes. Hot water ﬂows antomatically upwards while the cold water ﬂows down. The water in the storage tank will be heated from this nautal circulation.

Http://www.sidite-solar.com/category_3_Splitsolarwaterheater.html

SIDITE Solar:
China Manufacturer;
Solar Water Heater, Solar Collector;

Zhejiang Sidite New Energy Co.,Ltd.

China manufacturer, Solar water heater, solar hot water, solar hot water heater, solar water heater system, heat pipe solar water heater, pressured solar water heater, flat panel solar water heater, solar collector, solar thermal collector, vacuum tube solar collector, evacuated tube solar collector, solar panels.

Web: www.chinasidite.com
Tel: 0086-573-83224422 / 83225522
Fax: 0086-573-83225533
E-mail: sdt01@sidite.com

NON-PRESSURIZED STAINLESS STEEL SOLAR WATER HEATER SD-S

Http://www.sidite-solar.com/category_3_Splitsolarwaterheater.html

SIDITE Solar:
China Manufacturer;
Solar Water Heater, Solar Collector;

Zhejiang Sidite New Energy Co.,Ltd.

PREHEATED SOLAR WATER HEATER SP-C

1.It takes the advantage of the tap water’s pressure.
2.Completely automatic operation.
3.The water can be heated rapidly.
4.Use the copper coil as the heat exchanger, simply install and use.
5.No risk for corrosion or scale deposit, best option for inferiority water area.
6.Easy to install for ﬂat roof and pitched roof, auxiliary heating by electrical heater.
7.High pressure polyurethane foaming with thickness 55mm.

Working principle:
The vacuum tubes absorb the sunlight and turn it into the heat energy, heating the water in the tubes. Depend on the thermosiphon principle, the hot water from the tubes goes into water tank, while the cold water from the tank goes down to the tubes.
People do not use the water from the water tank directly. The cold water comes into the copper exchanger, be heated, then goes out from other side for people use.

Http://www.sidite-solar.com/category_3_Splitsolarwaterheater.html

SIDITE Solar:
China Manufacturer;
Solar Water Heater, Solar Collector;

Zhejiang Sidite New Energy Co.,Ltd.

INTEGRATIVE PRESSURIZED ALUMINUM ALLOY SOLAR WATER HEATER SP-H

1.The water will not ﬂow into the tubes directly,the system will still work even the tube broken.
2.With intelligent controller.
3.Anti-freezing, all-year-round service even in extremely cold area.
4.Adopting the best conduction performance metal- copper (heat pipe).
5.Directly connected with city water without a circulation pump.
6.Working pressure (0.6MPa).

Working principle:
Integrative pressurized series is a renovation model for the solar hot water, which adopts advanced heat pipe technology, combines heat pipe solar collector with pressurized tank to form a compact model.
The vacuum tubes absorb and convert solar energy into thermal energy, and transfer to the central heat pipe via the aluminum fn. The heat pipes have tiny amount of purifed water sealed inside at depressurized condition. When heated, the medium inside the heat pipes vaporizes at low temperature (about 30˚C), the vapor rises to the condenser and heat energy is conducted to water (inside the tank). When vapor is cooled down, and becomes condensate, falling to the bottom of heat pipe. By continuously circulating in this way, heat is carried from outside to the water inside the tank.

Http://www.sidite-solar.com/category_3_Splitsolarwaterheater.html

SIDITE Solar:
China Manufacturer;
Solar Water Heater, Solar Collector;

Zhejiang Sidite New Energy Co.,Ltd.

INTEGRATIVE PRESSURIZED FLAT PANEL SOLAR WATER HEATER SP-F

1.Thermosiphon direct system, easy piping work, higher effciency.
2.Intelligent control, automatic water flling.
3.Reliable electric back-up with protection against dry heating and thermal cut-out.
4.Pressurized water tank with SUS304-2B inner tank, good at anti-corrosion.
5.Operation under pressure to ensure comfortable shower water.
6.Polyurethane layer foaming insulation for keeping temperature of water.
7.Totally copper flow channels achieve low defect rate and easy maintenance, long service life.

Working principle:
Under normal operating conditions the potable water within the potable storage tank is heated by the solar collectors. For example, in an close circuit system where the household hot water is in the collector circuit, cold water is pushed downwards via the long external pipe from the storage tank to the bottom of the solar collector. As the water is heated in the absorber by the sun, it rises to the top of the collector then travels through the short external pipe into the storage tank.

Http://www.sidite-solar.com/category_3_Splitsolarwaterheater.html

SIDITE Solar:
China Manufacturer;
Solar Water Heater, Solar Collector;

Zhejiang Sidite New Energy Co.,Ltd.

INTEGRATIVE PRESSURIZED STAINLESS STEEL SOLAR WATER HEATER SP-HS

Http://www.sidite-solar.com/category_3_Splitsolarwaterheater.html

SIDITE Solar:
China Manufacturer;
Solar Water Heater, Solar Collector;

Zhejiang Sidite New Energy Co.,Ltd.

INTEGRATIVE PRESSURIZED GALVANIZED STEEL SOLAR WATER HEATER SP-H

Http://www.sidite-solar.com/category_3_Splitsolarwaterheater.html

SIDITE Solar:
China Manufacturer;
Solar Water Heater, Solar Collector;

Zhejiang Sidite New Energy Co.,Ltd.

SOLAR PROJECT NON-PRESSURIZED SOLAR COLLECTOR SC-V

1.SUS304 inner tank,resistant corrosion,long service life.
2.Unpressurized,can be used for natural circulation system,large collector area,easy to assemble and install.
3.Polyurethane insulation,high pressure foaming process,small heat conductivity coefficient,not easy to
loss heat.
4.Designed for commercial buildings,Suitable for schools, dormitories, hotel, bath center and other public construction.
5.Can be used in large swimming pool heating,industrial hot water and other hot water system.
6.High effcient all glass vacuum tube,high collect thermal effciency,high heat preservation effciency.

Working principle:
This model operates to feed water automatically.
Using thermosiphon system- depending on the different density between hot water and cold water, a water ﬂowing cycle is created in the tubes. Hot water ﬂows antomatically upwards while the cold water ﬂows down. The water in the manifold will be heated from this nautal circulation.

Http://www.sidite-solar.com/category_3_Splitsolarwaterheater.html

SIDITE Solar:
China Manufacturer;
Solar Water Heater, Solar Collector;

Zhejiang Sidite New Energy Co.,Ltd.

INLET AND OUTLET AT THE BOTTOM OF MANIFOLD SOLAR COLLECTOR SC-HD

1.Twin-glass evacuated tubes: reliable, effcient, high temperature resistant, anti-freezing.
2.There is no water in the vacuum tube, the system will still work even the tube broken.
3.Red copper heat pipe, one-way transferring, fast heat transfer, less heat loss, low temperature resistance, it can be used in -35℃.
4.Aluminum alloy manifold and bracket, corrosion resistance, easy to install. It’s suitable for ﬂat and sloping roof.
5.The inlet and outlet are on the bottom of manifold; It looks
more artistic than traditional manifold.
6.Good sealed in end of cover, It can provide higher insulation effciency.
7.The most advantage is that It can empty the medium( water or deicing ﬂuid) in the manifold.

Working principle:
The vacuum tube absorbs solar radiation and transform into heat, pass to the fn by the tube wall, and then transfer to the heat pipe by the fn, after heat pipe absorbs heat, heat pipe end (evaporation section) vaporization, transfer to condenser, then circulation because of gravity, heating the water(medium) in the manifold.

Http://www.sidite-solar.com/category_3_Splitsolarwaterheater.html

SIDITE Solar:
China Manufacturer;
Solar Water Heater, Solar Collector;

Zhejiang Sidite New Energy Co.,Ltd.

POLYURETHANE FOAMING INSULATION SOLAR COLLECTOR SC-HP

1.Twin-glass evacuated tubes: Reliable, effcient, high temperature resistant, anti-freezing.
2.There is no water in the vacuum tube, the system will still work even the tube broken.
3.Red copper heat pipe, one-way transferring, fast heat transfer, less heat loss, low temperature resistance, it can be used in -35℃.
4.Aluminum alloy manifold and bracket, corrosion resistance, easy to install. It’s suitable for ﬂat and sloping roof.
5.High temperature resistant polyurethane foaming / rock wool high density, good thermal insulation properties.
6.High quality copper manifold, it can proof pressure 1MPa.
7.Solar Keymark certifcation.
8.Eco and economical, Improves the environment and save your fuel cost.

Working principle:
The vacuum tube absorbs solar radiation and transform into heat, pass to the fn by the tube wall, and then transfer to the heat pipe by the fn, after heat pipe absorbs heat, heat pipe end (evaporation section) vaporization, transfer to condenser, then circulation because of gravity, heating the water(medium) in the manifold.

Http://www.sidite-solar.com/category_3_Splitsolarwaterheater.html

SIDITE Solar:
China Manufacturer;
Solar Water Heater, Solar Collector;

Zhejiang Sidite New Energy Co.,Ltd.

2018年8月8日星期三

Largest ever IEA Energy Efficiency in Emerging Economies Training Week held in Jakarta

Gita Lestari, Deputy Director for Energy Conservation, Technical Guidance and Cooperation of Indonesia, delivers remarks on the first day of the training week (Photograph: IEA)

The IEA and the Indonesian Ministry of Energy and Mineral Resources co-hosted the second Energy Efficiency in Emerging Economies Training Week for Southeast Asia in Jakarta, Indonesia from 16-20 July 2018.

The event brought together 220 energy efficiency professionals from government institutions, industry and academia and supporting organisations across Southeast Asia.

“Energy efficiency is key to ensuring a safe, reliable, affordable and sustainable energy system for the future,” said IEA Executive Director Dr Fatih Birol in closing remarks delivered on the first day of the event. “I hope that you will take this opportunity to build on your knowledge and networks and help tackle the challenges you are facing in your home countries with fresh ideas and tools for scaling up energy efficiency.”

The Training Week consisted of 6 parallel courses on energy efficiency in: buildings; industry; lighting, appliances, and equipment; transport; statistics; and policy and programme evaluation. Each course offers a mix of lectures, interactive discussions ad practical exercises aimed to equip participants with knowledge and skills on developing energy efficiency initiatives in their respective countries.

The programme also includes joint sessions on assessing the potential for energy efficiency, tracking progress, communication campaigns and finance as well as a special focus on valuing the social and economic benefits of energy efficiency measures. Participants also had the opportunity to take part in a site visit.

订阅：博文 (Atom)