INTEGRATIVE PRESSURIZED STAINLESS STEEL SOLAR WATER HEATER SP-HS

1.The water will not flow into the tubes directly,the system will still work even the tube broken. 
2.With intelligent controller. 
3.Anti-freezing, all-year-round service even in extremely cold area. 
4.Adopting the best conduction performance metal- copper (heat pipe). 
5.Directly connected with city water without a circulation pump. 
6.Working pressure (0.6MPa). 

Working principle: 
Integrative pressurized series is a renovation model for the solar hot water, which adopts advanced heat pipe technology, combines heat pipe solar collector with pressurized tank to form a compact model. 
The vacuum tubes absorb and convert solar energy into thermal energy, and transfer to the central heat pipe via the aluminum fn. The heat pipes have tiny amount of purifed water sealed inside at depressurized condition. When heated, the medium inside the heat pipes vaporizes at low temperature (about 30˚C), the vapor rises to the condenser and heat energy is conducted to water (inside the tank). When vapor is cooled down, and becomes condensate, falling to the bottom of heat pipe. By continuously circulating in this way, heat is carried from outside to the water inside the tank.

DESCRIPTION

strcuture:

1.Water inlet

2.Water outlet

3.P/T Valve

4.Electrical heater

5.Drain vent

6.Sensor hole

7. Heat exchange tube

product features:

1.Glass vacuum tube solar collector, high temperature,antifreeze,vacuum insulation.

2.Copper heat pipe,Start up quickly,transfers heat quickly, low start-up temperature,low temperature resistant

3.Food-grade stainless-steel SUS304 2B inner tank,full-automatic welding technology,under the protection of magnesium rod,it can increase of service life.

4.High pressure polyurethane foaming insulation,as the prefect density and the thermal conductivity coefficient is small, so it can provide effective heat preservation

5.The outer tank is color steel plate,and it has good double anti-corrosion function.

6.Gravity assisted heat pipe, unilateral heat transfer,high efficiency,low heat loss.

7. work under pressure,withstand pressure 1.0MPa,The sensation will be more comfortable

 

Item Technical Data

Specification & model	SP-H-15	SP-H-18			SP-H-20	SP-H-24	SP-H-25	SP-H-30
Tube QTY（pcs）	15	18			20	24	25	30
Tube spacing㎜）	75	75			75	75	75	75
WATER TANK
Net Volume of Storage Tank（L）	125	145			160	190	200	235
Diamater of inner/outer Tank（㎜）	φ360/φ470	φ360/φ470			φ360/φ470	φ360/φ470	φ360/φ470	φ360/φ470
material and thickness of inner tank（㎜）	SUS304 /t1.2	SUS304 /t1.2			SUS304 /t1.2	SUS304 /t1.2	SUS304 /t1.2	SUS304 /t1.2
material of outer tank	stainless steel	stainless steel			stainless steel	stainless steel	stainless steel	stainless steel
material of insulation	polyurethane	polyurethane			polyurethane	polyurethane	polyurethane	polyurethane
Size of electrical heater hole	11/4″	11/4″			11/4″	11/4″	11/4″	11/4″
Cold water inlet hole	3/4″	3/4″			3/4″	3/4″	3/4″	3/4″
Hot water outlet hole	3/4″	3/4″			3/4″	3/4″	3/4″	3/4″
T/P valve hole	3/4″	3/4″			3/4″	3/4″	3/4″	3/4″
Drain vent hole and Magnisium hole	3/4″	3/4″			3/4″	3/4″	3/4″	3/4″
Sensor hole	1/2″	1/2″			1/2″	1/2″	1/2″	1/2″
Vacuum Tube
Diameter/Length（㎜）	φ58/1800	φ58/1800			φ58/1800	φ58/1800	φ58/1800	φ58/1800
Material	High boron and silicon glass 3.3	High boron and silicon glass 3.3			High boron and silicon glass 3.3	High boron and silicon glass 3.3	High boron and silicon glass 3.3	High boron and silicon glass 3.3
Outside thickness（㎜）	1.8	1.8			1.8	1.8	1.8	1.8
Inside thickness（㎜）	1.6	1.6			1.6	1.6	1.6	1.6
Light transmission rate	≥0.90	≥0.90			≥0.90	≥0.90	≥0.90	≥0.90
Vacuum degree （Pa）	＜10^-2	＜10^-2			＜10^-2	＜10^-2	＜10^-2	＜10^-2
Coating absorption	≥0.90	≥0.90			≥0.90	≥0.90	≥0.90	≥0.90
Coating emittance	≤0.07	≤0.07			≤0.07	≤0.07	≤0.07	≤0.07
Average heat loss coefficient	≤0.75W/(㎡·℃)	≤0.75W/(㎡·℃)			≤0.75W/(㎡·℃)	≤0.75W/(㎡·℃)	≤0.75W/(㎡·℃)	≤0.75W/(㎡·℃)
Frame	2 feets ( left-to-right )					3 feets ( left-middle-right )
Material	Galvanized steel t1.2		Galvanized steel t1.2	Galvanized steel t1.2		Galvanized steel t1.2	Galvanized steel t1.2	Galvanized steel t1.2
Angle	45°	45°			45°	45°	45°	45°
Tube support Specification/hole distance（㎜	φ58/75	φ58/75			φ58/75	φ58/75	φ58/75	φ58/75
Accessories：
Tube sealing ring	Silicon rubber/φ58		Silicon rubber/φ58	Silicon rubber/φ58		Silicon rubber/φ58	Silicon rubber/φ58	Silicon rubber/φ58
Tube dusting rings	Silicon rubber/φ58		Silicon rubber/φ58	Silicon rubber/φ58		Silicon rubber/φ58	Silicon rubber/φ58	Silicon rubber/φ58
Tube holder	ABS/φ58		ABS/φ58	ABS/φ58		ABS/φ58	ABS/φ58	ABS/φ58
Item Size：：
A   (㎜)	1385	1610			1760	2060	2135	2510
B   (㎜)	1110	1335			1485	1785	1860	2235
C   (㎜)	1700	1700			1700	1700	1700	1700
C/2 (㎜)	——	——			——	892.5	930	1255
D   (㎜)	1430	1430			1430	1430	1430	1430

 

 

 

http://www.sidite-solar.com/category_3_Splitsolarwaterheater.html

SIDITE Solar: 
China Manufacturer;
Solar Water Heater, Solar Collector;

Zhejiang Sidite New Energy Co.,Ltd.

China manufacturer, Solar water heater, solar hot water, solar hot water heater, solar water heater system, heat pipe solar water heater, pressured solar water heater, flat panel solar water heater, solar collector, solar thermal collector, vacuum tube solar collector, evacuated tube solar collector, solar panels.

Web: www.chinasidite.com
Tel: 0086-573-83224422 / 83225522
Fax: 0086-573-83225533
E-mail: sdt01@sidite.com