SPLIT FLAT PLATE SOLAR WATER HEATER SYSTEM SS-F

1.The solar collector and water tank can be placed separately, easy to install, easy for building integration. 
2.The water tank is indirect tank with copper coil exchangers, completely solve the problem of collector in freezing and harsh water area. 
3.Copper coil exchangers can realize the cycle for solar energy and the cycle for electric heater or gas for supplementary energy. 
4.Reliable electric back-up with protection against dry heating and thermal cut-out. 
5.With high quality flat solar collector and stainless steel water tank for long service life. 
6.Totally copper flow channels achieve low defect rate and easy maintenance, long service life. 

Working principle: 
The SS-F series, in streamline closed circuit systems which are recommended for frost prone and poor water quality situations. Antifreeze fluid is used to circulation through the collectors. The heat collected from the panels is transferred from the fluid pipes to the water tank by a heat exchanger. The circulator is regulated by a control unit on the water heater. This ensures the optimum use of the sun’s free energy. 
Copper coils exchanger can realize the cycle for solar energy and the cycle for electric heater or gas for supplementary energy to ensure you always have hot water on tap at any weather.

DESCRIPTION

Structure：1 Flat Panel Collector；2 Circulation Pipe；3Water Tank；4 T/P Valve；5 Upper Copper Coil；6 Bottom Copper Coil；7 Work Station；8 Expansion Tank；9 Check Valve

Model	SS-F2-150	SS-F2-200	SS-F2-250	SS-F2-300	SS-F2-400	SS-F2-500
Tank Volume（L）	150	200	250	300	450	500
Panel Qty(pcs)①	1	2	2	3	4	5
Controller	SR868C8	SR868C8	SR868C8	SR868C8	SR868C8	SR868C8
Work Station	VSP-S1	VSP-S1	VSP-S1	VSP-S1	VSP-S2	VSP-S2
Expansion Tank	12L	12L	18L	18L	24L	24L
MediumCubage
Recommend Flow	1.0～2.0L/min	1.2～2.5L/min	1.5～3.0L/min	3.0～5.0L/min	4.0～7.0L/min	5.0～8.0L/min
Max Temperature of Tank	95℃	95℃	95℃	95℃	95℃	95℃
Max Temperature of the System	95℃	95℃	95℃	95℃	95℃	95℃
Tank RatedPressure	0.7MPa	0.7MPa	0.7MPa	0.7MPa	0.7MPa	0.7MPa
Medium Pressure Filling	0.2～0.3MPa	0.2～0.3MPa	0.2～0.3MPa	0.2～0.3MPa	0.2～0.3MPa	0.2～0.3MPa
MaxPressureofTheSystem	0.6MPa	0.6MPa	0.6MPa	0.6MPa	0.6MPa	0.6MPa
Voltage	AC220V 50HZ	AC220V 50HZ	AC220V 50HZ	AC220V 50HZ	AC220V 50HZ	AC220V 50HZ
The Recommend Pipe Diameter	Φ15	Φ15	Φ15	Φ15	Φ22	Φ22

 

Features： 

1、 FOOD GRADE STAINLESS STEEL SUS304-2B INNER TANK, CAN STAND 1MPA

2、 COPPER COIL AS A HEAT EXCHANGER WITH HIGH HEAT TRANSFER EFFICIENCY。

3、 TWO COPPER COILS FOR HEAT EXCHANGE, WHICH CAN BE COMBINED WITH ELECTRICAL HEATING SYSTEM, GAS HEATER, HOT WATER BOILER, ETC., TO PROVIDE YOU WITH HOT WATER ALL DAY.

4、 HIGH EFFICIENT FLAT PANEL COLLECTOR WITH BLUE FILM ABSORBER, EASY TO BE INSTALLED AND COMBINED WITH THE ROOF BEAUTIFULLY.

5、 INTEGRATED WORK STATION FOR TEMPERATURE CIRCULATION MAKES THE SYSTEM EFFICIENT AND ENERGY-SAVING.

6、THE POSITION OF WATER TANK INSTALLATION IS   UNLIMITED, IT CAN BE INSTALLED ACCORDING TO THE ROOM.

 

http://www.sidite-solar.com/category_3_Splitsolarwaterheater.html

SIDITE Solar: 
China Manufacturer;
Solar Water Heater, Solar Collector;

Zhejiang Sidite New Energy Co.,Ltd.

China manufacturer, Solar water heater, solar hot water, solar hot water heater, solar water heater system, heat pipe solar water heater, pressured solar water heater, flat panel solar water heater, solar collector, solar thermal collector, vacuum tube solar collector, evacuated tube solar collector, solar panels.

Web: www.chinasidite.com
Tel: 0086-573-83224422 / 83225522
Fax: 0086-573-83225533
E-mail: sdt01@sidite.com