SPLIT PRESSURIZED SOLAR WATER HEATER SYSTEM SS-M

1.The solar collector and water tank can be placed separately, easy to install, easy for building integration. 
2.The water tank is indirect tank with copper coil exchangers, completely solve the problem of collector in freezing and hard water area. 
3.Copper coil exchangers can realize the cycle for solar energy and the cycle for electric heater or gas for supplementary energy. 
4.Reliable electric back-up with protection against dry heating and thermal cut-out. 
5.Low breakdown rate and easy maintenance. 
6.Easy operation and intelligent control. 

Working principle: 
The SS-M series, in streamline closed circuit systems which are recommended for frost prone and poor water quality situations. Antifreeze fluid is used to circulation through the collectors. The heat collected from the panels is transferred from the fluid pipes to the water tank by a heat exchanger. The circulator is regulated by a control unit on the water heater. This ensures the optimum use of the sun’s free energy. Copper coils exchanger can realize the cycle for solar energy and the cycle for electric heater or gas for supplementary energy to ensure you always have hot water on tap at any weather.

DESCRIPTION

1.Food-grade stainless steel SUS304-2B inner tank，Maximum anti Pressure1MPa

2.Copper coil heat exchanger, high heat transfer efficiency.

3.Double Copper coils heat exchanger, Can be combined with auxiliary electricity, gas and other boiler to Auxiliary heating, Achieve all-day hot water.

4.High Efficiency Heat Pipe solar collectors, three target vacuum tube、Collector and roof Combined beautiful, Easy installation.

5.Integrated workstation，different Temperature cycle，make system Efficient and energy saving.

6.Install the location of water tank no limited, Can be installed according to the layout of the room.

Detailed Product Description:

 

Technical Data：

System model	SS-M0-150	SS-M 0-200	SS-M 0-250	SS-M0 -300	SS-M 0-400	SS-M0 -500
Tank capacity（L）	150	200	250	300	450	500
Copper coil qty	1/2	1/2	1/2	1/2	1/2	1/2
Solar collector model	SC-H-15/20	SC-H-20/24	SC-H-25/30	SC-H-30/20	SC-H-20/24	SC-H-25/30
Solar collector qty	1/1	1/1	1/2	1/2	2/2	2/2
Controller model	SR868C8	SR868C8	SR868C8	SR868C8	SR868C8	SR868C8
Work station model	VSP-S1	VSP-S1	VSP-S1	VSP-S1	VSP-S2	VSP-S2
Expansion tank spec	12L	12L	18L	18L	24L	24L
Medium volume	12L	12L	18L	18L	24L	24L
Recommended Flow	1.0～2.0L/min	1.2～2.5L/min	1.5～3.0L/min	3.0～5.0L/min	4.0～7.0L/min	5.0～8.0L/min
Max temperature of tank	95℃	95℃	95℃	95℃	95℃	95℃
Max temperature of system	95℃	95℃	95℃	95℃	95℃	95℃
Rated pressure of the tank	0.7MPa	0.7MPa	0.7MPa	0.7MPa	0.7MPa	0.7MPa
Media pre pressure	0.2～0.3MPa	0.2～0.3MPa	0.2～0.3MPa	0.2～0.3MPa	0.2～0.3MPa	0.2～0.3MPa
Max pressure of system	0.6MPa	0.6MPa	0.6MPa	0.6MPa	0.6MPa	0.6MPa
Voltage	AC220V 50Hz	AC220V 50Hz	AC220V 50Hz	AC220V 50Hz	AC220V 50Hz	AC220V 50Hz
Recommended pipe diameter	φ15	φ15	φ15	φ15	φ22	φ22

http://www.sidite-solar.com/category_3_Splitsolarwaterheater.html

SIDITE Solar: 
China Manufacturer;
Solar Water Heater, Solar Collector;

Zhejiang Sidite New Energy Co.,Ltd.

China manufacturer, Solar water heater, solar hot water, solar hot water heater, solar water heater system, heat pipe solar water heater, pressured solar water heater, flat panel solar water heater, solar collector, solar thermal collector, vacuum tube solar collector, evacuated tube solar collector, solar panels.

Web: www.chinasidite.com
Tel: 0086-573-83224422 / 83225522
Fax: 0086-573-83225533
E-mail: sdt01@sidite.com